Prolen®Medical fabricsaremade of 100% polypropylene fibre Prolen®Siltexand Prolen®Bodyfresh, which is treated with a permanent antimicrobial treatment based on silver and zinc ions and meet the requirements of health safety according to the current legislation of the Slovak Republic and the European Union. The antimicrobial additive is homogeneously distributed in the mass of Prolen®Siltex and Prolen®Bodyfresh polypropylene fibres, with efficacy throughout the lifetime of the final product.
The active ingredient with silver and zinc ions provides effective ANTIVIRAL AND ANTIMICROBIAL protection, reduces unpleasant odours, ensures hygienic freshness and cleanliness and reduces the risk of cross-contamination.
The antimicrobial additive in Prolen®Siltex and Prolen®Bodyfresh is permanent, does not leak into your skin and does not wash out into wastewater as is the case with surface antimicrobial treated fabrics such as cotton or polyester.
The Prolen®Medical product line complies with EN13975-1 (surgical gowns, gowns and clean air garments used as medical devices for patients, medical staff and equipment) and is designed for the control and management of infectious environments in the hospital setting with a major impact on infections associated with medical and nursing care.
Composition: 100% polypropylene Prolen®Siltex and Prolen®Bodyfresh
Properties of Prolen®Siltex and Prolen®Bodyfresh fabrics
ANTIVIRAL PROPERTIES: ISO 18184:2019
- SARS-CoV-2 coronavirus (causing Covid-19 disease): >99% reduction
- Influenza A virus subtype H1N1 >99% reduction
ANTIBACTERIAL PROPERTIES: AATCC 100:2019
- Klebsiella pneumoniae >99.9% reduction
- Staphylococcus aureus >99.9% reduction
- Escherichia Coli > 99.9% reduction
CLEAN ENVIRONMENT:
- EN 13795-1 Prolen®Medical 95
MOISTURE DRAINAGE:
- STN EN ISO 11092:2015
MEDICAL HARMLESSNESS:
- STN 80 0055: 2004 and Regulation (EC) No 1907/2006 - REACH
ECOLOGY AND SAFETY:
- Standard 100 by OEKOTEX, Class 1, Appendix 6 - contact with children's skin
HIGH QUALITY:
- ISO 9001:2015
- EN ISO 14001:2015
REUSABLE:
- Minimum 100 standard wash cycles
STERILIZABILITY:
- Can be sterilised up to 135°C.
LIGHTNESS AND COMFORT:
- The density of Prolen® fibre is 0.9 g/cm3: the drape floats on water.
ZERO MOISTURE ABSORPTION, HYDROPHOBICITY:
- Prolen® fibre absorbs only 0.01% moisture (cotton 8-10%).
RECYCLABILITY, LOW ECOLOGICAL BURDEN:
- Polypropylene is 100% recyclable, zero water consumption in production.
DOES NOT RELEASE SHORT FIBRES AND PARTICLES:
- The Prolen®Medical product line is made of multifilament fibre without loose ends, not spun short fibres (cotton) which are released into the environment when rubbed.
SLOVAK PRODUCT:
- From the basic raw material, through the fibre to the finalisation of the product, the Prolen® Medical range is made in Slovakia, by buying this product you are supporting our local economy.
Recommended treatment:
Prolen®Medical can be washed and sterilised several times until it is mechanically damaged. The product lifetime is a minimum of 100 washes with preservation of antimicrobial properties.
Wash between 40ºC and 70ºC, for bed linen with luminous motifs we recommend washing at 40ºC.
We recommend blasting at 400 rpm, max. 600 rpm.
Cleaning agent: any type, disinfectants including chlorine are allowed .
Do not use fabric softener to maintain the hydrophobicity of the product .
Drying: fast drying, zero water absorption.
Dryer: recommended temperature 40ºC / max. 40ºC Duration: 20 min. + 5 min. cold.
Drying tunnel: recommendation 70ºC, max 70ºC.
Ironing: do not iron directly, only low temperature ironing with steam is allowed.
After the washing or drying process is complete, it is recommended to hang or fold the garments immediately to reduce the amount of creases.
Sterilization max. up to 135°C.
Reviews
No one has added ratings yet.